xTool S1 Example Project - Making a Phone Holder - xTool Support Center (2024)

This article will step you through the whole process of laser creation, from device connection to material processing. In this article, you can get detailed instructions on how to use xTool S1 to make a phone holder, as well as ready-made project files to download. You can also find more project files for different creations using different materials at the end of this article.

Now, get yourself ready, and let's begin creation!

Note: xTool S1 is delivered with a material pack. You can conduct the example projects with the materials in the pack.

• An xTool S1
  Get your xTool S1 ready following the instructions in "Preparations Before Using xTool S1".
• A honeycomb panel (or a set of slats)
  Using the honeycomb panel or slats can reduce the burned area on the back of the material as well as protect the baseplate during laser cutting.
• A computer
  Download and install xTool Creative Space (XCS) to your computer.
• A USB cable (included in the pack of xTool S1)
• A basswood sheet A5 (included in the material pack of xTool S1)
• The project file “Phone holder-1.xcs”
  • 1. Phone holder-1 10W.xcs
  • 1. Phone holder-1 20W.xcs
  • 1. Phone holder-1 40W.xcs

Step 1: Connect xTool S1 with XCS

(1) Turn on xTool S1. Wait until the annular indicator lights up.

(2) Connect xTool S1 to your computer by using the USB cable.

(3) Open XCS on your computer. On the top-right corner of XCS, click Connect device. Then, on the pop-up window, click the name of your device to connect to it.

Note: If you cannot find your device on the device list, you can try clicking the Refresh button to refresh the list.

Step 2: Place the material

(1) Place the honeycomb panel on the baseplate of xTool S1 and move it to the right against the inner side of xTool S1.

Note: You can also use the slat set as an alternative to the honeycomb panel.

See Also

X Class Adventure Awaits with Top-tier Phone Holders | HoldMyPhone.com.auRAM X-Grip Smart Phone HolderBest Off-Road Phone MountsReview: Delta Cycles handlebar smartphone mounts offer tough, lightweight options for screen time

(2) Place the A5 basswood sheet on the honeycomb panel.

Step 3: Import the project file

(1) Download the project file based on the power of the laser module.

Download links:

• 1. Phone holder-1 10W.xcs
• 1. Phone holder-1 20W.xcs
• 1. Phone holder-1 40W.xcs

In the upper left corner of XCS, click the icon and select Open project... In the pop-up window,select the downloaded project file of the phone holder and click Open.

Note: A project file contains designs as well as parameter settings for laser processing. You don't need to set parameters by yourself.

Step 4: Set the focus

(1) Move the laser module to where the basswood sheet is placed. Ensure that the light spot falls on the surface of the basswood sheet.

(2) On the right side of XCS, click the button in the Distance section. Then, xTool S1 will automatically measure the distance from the laser module to the surface of the basswood sheet.

Step 5: Mark the target processing area on the canvas

(1) On the right side of XCS, click Start marking.

(2) Move the laser module to make the light spot fall at the upper left vertex of the target processing area, and press the button on the device to record the position. Then, repeat the same steps to record the bottom right vertex of the target processing area.

(3) Click Done, and then the target processing area will be marked out on the canvas.

Step 6: Adjust and preview the actual processing area on the material

(1) Select all the elements on the canvas and drag them to the inside of the target processing area.

(2) At the bottom right corner of the software, click the icon next to the framing button to set the framing speed.

(3) Close the lid of xTool S1, and then click Framing in the software. Press the button on xTool S1 to start framing. The laser spot will move along the boundary of the processing pattern on the material so that you can preview the processing area.

(4) After you confirm that the processing area is proper, click Framing completed in XCS. If the area is not ideal, you can adjust the material position or adjust the element positions in the software, and then preview the processing area again.

Step 7: Start processing

(1) On the bottom right corner of the software, click Processing.

(2) Preview the processing objects in the software. Then, in the upper right corner of the software, click Start.

(3) Close the lid of xTool S1. Then, press the button on xTool S1 to start processing.

(4) After xTool S1 finishes the processing task, detach the cutting pieces from the basswood sheet. Then, assemble the pieces into a phone holder.

Download the project files you like and use the materials required to create more works.