The Best Satinwood Paint 2022 | UK Reviews By DIY Works (2023)

A satinwood paint is best used for achieving a durable mid-sheen finish to interior wood or metal surfaces. Unlike alternative paints, they are able to retain a durable non-yellowing finish for much longer and within this article, we list some of the best.

DIY Works is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Find out more.

If you require a quick answer, the best satinwood paint is theDulux Quick Dry, which provides excellent coverage and a non-yellowing mid sheen satin finish. However, if you are on a budget, theJohnstone’s alternativeis the best option.

To rate the satinwood paints within this article, we based our recommendations upon testing, our experience of using multiple satinwood paints, plenty of research and a number of factors. The factors that we considered included their coverage, ease of application, finish, non-yellowing capabilities, time to dry, colours available and value for money.

Best Satinwood Paint Overview

  • Best Overall: Dulux Quick Dry
  • Best Value:
  • Best One Coat: Dulux Once
  • Best All-Rounder: Crown Quick Dry
  • Best Non-Yellowing: Ronseal 2-in-1
  • Best Value Runner-Up: Leyland Oil Based

If you are fed up ofgloss paintsturning yellow overtime, switching to a satinwood paint is highly recommended. They are available in water or oil based formulas and most provide excellent coverage and fast drying mid-sheen finishes.

Below is alist of the best satinwood paintsthat provide a long lasting non-yellowing finish and are suitable for interior wood or metal surfaces.

The Best Satinwood Paints

1. Best Overall: Dulux Quick Dry

The Dulux Quick Dry Satinwood paint is a premium option but it’sone of the best on the market. The fast drying formula is touch dry in one hour and provides long lasting protection that stays white.

It’s a self-undercoating paint that produces a low odour and is easy to apply to both wood or metal surfaces. For the best results, it’s recommended that you apply at least two coats with a brush and wait at least 6 hours between the coats.

Pros

  • 16 m2 coverage per litre
  • Non-drip and easy to apply
  • Desirable mid-sheen satin finish
  • Oil based non-yellowing formulation
  • Touch dry in just one hour

Cons

  • Most expensive per litre within our roundup

Although expensive, it’s theultimate non-yellowing satinwood paintthat won’t disappoint. The Dulux Quick Dry range is highly rated across the UK and this satinwood paint leads the way as one of the best that they offer.

(Video) The Absolute Best Paint for Furniture (24 Brands Blind Tested & Reviewed)

2. Best Value: Johnstone’s Interior Wood & Metal

Just as popular as the Dulux satinwood paints on the market is the Johnstone’s Quick Dry alternative. It’s anaffordable water based paintthat’s available in achoice of ten colours options.

For the best results, the brand recommend liberally applying the paint with a brush or roller. Before applying the second coat, it’s advised that you allow 3 to 4 hours for the first coat to fully dry.

Pros

  • 12 m2 coverage per litre
  • Touch dry within 1 to 2 hours
  • Self undercoating
  • Non-yellowing water based formula
  • Suitable for most interior wood or metals
  • Low odour output for more enjoyable painting
  • Available in 0.75, 1.25 and 2.5 litre tins

Cons

  • From our testing, it required two coats for the best finish

To conclude, the Johnstone’s Quick Dry is by farthe best satinwood paint for the moneythat’s available in a great selection of colours. It’s a versatile paint that leaves a great finish on a range of surfaces and it won’t disappoint.

3. Best One Coat: Dulux Once White Satinwood Paint

Another satinwood paint by Dulux is the “Once” formula and as the name suggests, itonly requires a single coat. For the best satin finish upon wood or metal surfaces, Dulux recommend that you apply a thick even coat.

Compared to the Quick Dry formula above, it takes up to 16 hours to dry and provides less coverage. However, it’s much cheaper and only requires a single application of the paint.

(Video) The Best Paint for Cabinets (24 Brands Blind Tested & Reviewed)

Pros

  • 12 m2 coverage per litre
  • Single brush application
  • No undercoat needed
  • Non-yellowing and long lasting finish

Cons

  • Requires 16 hours to fully dry

If you require ahigh quality satinwood paintthat’s easy to apply and only requires a single coat, the Dulux Once is the best option. It’s relatively affordable and is produced by the reputable Dulux brand for complete peace of mind.

4. Best All-Rounder: Crown Quick Dry Satin Paint

The Crown Quick Dry is a highly rated alternative to the Dulux and Johnstone’s paints and it provides adurable mid sheen finish. The water based formulation is fast drying and specifically designed for interior wood or metal.

Pros

  • Fast drying and touch dry in 1 hour
  • Hard wearing and wipeable
  • 12 m2 coverage per litre
  • Designed for interior wood and metal
  • Stays white water based formulation
  • Easy to apply by brush or roller
  • Available in a 2.5 or 5 litre tin

Cons

  • Requires two coats for the best finish
(Video) ScrewFix No Nonsense Quick Dry Satin Paint - review

Overall, the Crown Quick Dry is anexcellent all-round satinwood paintthat ticks all the boxes and won’t disappoint. When used as a topcoat, it leaves a hard wearing finish that’s wipeable and easy to maintain for many years to come.

5. Best Non-Yellowing: Ronseal 2-in-1 Satinwood Paint

For tackling bare or worn interior wood, the Ronseal 2-in-1 is an excellent option. According to the brand,it’s the easiest satinwood paint to useas it primes and paints and only requires two coats.

Whether you arepainting your skirting boards, doors or windows, this satinwood comes with a stay white 10 year guarantee for complete peace of mind.

Pros

  • Stay white guarantee of 10 years
  • Touch dry within 30 minutes
  • Water based formula
  • Non-drip brush application
  • Low VOC

Cons

  • Only covers up to 6.5m2 per litre
  • Requires two coats for the best non-yellowing finish

Overall, the Ronseal 2-in-1 is an easy paint to work with that’s fast drying andguaranteed to stay white for up to 10 years. The only main drawback is the poor coverage per litre, which may be an issue for those painting large surfaces.

6. Best Value Runner-Up: Leyland Oil Based Satinwood Paint

One of the cheapest satinwood paints that’sactually worth buyingis by the Leyland brand. It’s a self-undercoating formula that’s suitable for interior wood or metal and leaves a high quality satin finish.

In terms of the application, the paint can be applied by brush or roller and recoated within 16 to 24 hours.

(Video) ProClassic Satin Paint Review

Pros

  • Hard wearing and knock-resisting satin finish
  • Self-undercoating formula
  • Easy to use on wood or metal
  • 20 m2 coverage per litre
  • Touch dry in 4 hours
  • Application by brush or roller
  • Available as a 2.5 or 5 litre tin

Cons

  • Whilst testing out the formula upon skirting board, we found that it had a strong smell

To conclude, the Leyland Satinwood Paint is ahigh quality yet affordableoption that leaves an excellent soft sheen finish. It’s the cheapest satinwood paint per litre and it provides excellent coverage at 20 square metres.

How We Tested & Rated The Satinwood Paints

Whilst decorating our house during a recent renovation, we tried and tested a whole range of satinwood paints. To test the paints, we mostly used them to paint skirting board, architrave and door frames but we also used them on some metals such as the radiator pipes.

During our testing, we really liked the Dulux Once satinwood paint (as shown in the photo) because it really did tick all the boxes and it works great upon skirting.

As well as testing, we also based our recommendations upon plenty of research and a number of factors. The factors that we considered included their coverage, ease of application, finish, non-yellowing capabilities, time to dry, colours available and value for money.

The Best Satinwood Paint 2022 | UK Reviews By DIY Works (7)

Conclusion

Satinwood paint has become increasingly more popular over the last few years and for good reason too. It’s easy to apply to most interior wood or metal surfaces and it leaves a durable mid-sheen finish.

All of our recommendations include a range of water and oil based satinwood paints that provide a long lasting non-yellowing finish. Both Dulux and Johnstone’s paints are the most popular but there are many alternatives that offer better coverage or unique features such as a wipeable finish.

The Best Satinwood Paint 2022 | UK Reviews By DIY Works (8)

Written By Edward Bailey

From painting garden fences to mist coats upon fresh plaster, Edward (also referred to as "Eddie") is the specialist when it comes to painting and decorating. He learnt his trade from being a self-employed decorator and painter for five years but he has since moved part time in order to play a role as one of the main authors upon DIY Works.

(Video) The Absolute Best Paint for Cabinets

If you want to find out more about Edward, our testing process or the website itself, visit our about page for further information.

FAQs

How do I get a good finish with satinwood? ›

If using satinwood or eggshell then apply 2 coats for best results. Make sure to rub down between coats. The finish coat will take longer to dry than the undercoat or primer. Make sure not to use to much paint at this stage because it will drip or sag if there's a lot applied.

Do you need two coats of satinwood? ›

The normal finishing process is 2 full coats of Dulux Trade Satinwood. However, where a strong colour change is required, then a coat of an appropriate coloured Dulux Trade Undercoat may be necessary.

Does satinwood paint need an undercoat? ›

Dulux Trade Satinwood is a solvent-based satin finish formulation that is tough, hardwearing and dirt resistant. Does not require an undercoat except where a strong colour change is required. Suitable for use on interior wood and metal surfaces.

How do I get a smooth finish with satin paint? ›

Cover the whole wall then fill in any edges with a smaller roller or brush. Keep going with two or three coats until you are happy with the result, rubbing down after each coat is dry. If you're painting kitchen cabinets with satin paint, you can use a brush, though a small roller will take less time.

How do you prevent roller marks with satin paint? ›

If you do this, you won't have to worry about stippling or roller marks in paint:
  1. Use the right size roller cover. Larger surfaces need larger rollers.
  2. Use the right style of brush for the type of painting you are doing. ...
  3. Use a high-quality paint. ...
  4. Buy enough paint for the job.

Can I apply satinwood with a roller? ›

Short or medium pile microfibre mini rollers are the best when applying water-based, woodwork paints, such as Quick Dry Eggshell, Quick Dry Satinwood or Quick Dry Gloss. Avoid using foam mini rollers when applying Quick Dry products, as these can cause paint bubbles to form when rolled onto the surface.

Do I need a primer for satinwood? ›

Dulux Trade Satinwood is a solvent-based satin finish formulation that is tough, hardwearing and dirt resistant. Does not require an undercoat except where a strong colour change is required. STIR THOROUGHLY BEFORE USE.

Can you paint satin over satin without sanding? ›

Yes, and you don't even need to sand. Just clean with sugar soap to remove grease before you start. Painting over satin paint without sanding is fine too, but do clean twice to ensure a spotless surface before applying fresh paint.

How long should you leave between coats of satinwood? ›

Apply 2 coats with a brush, leave at least 6 hours between coats, longer when cold and damp. TIP: if the colour change is strong, more coats may be required.

What lasts longer satinwood or gloss? ›

Oil-based satinwood will still discolour, but the paint does not contain as much alkyd oil as gloss, so the discolouring process takes a lot longer. A good quality oil-based satinwood such as Dulux Trade or Crown Trade will keep its colour for years.

Does Dulux Once Satinwood need primer? ›

Dulux Once Satinwood has been specially formulated to give a perfect satin finish on interior primed or painted wood or metal surfaces in just one coat. It does not require an undercoat.

Should I sand between coats of satin paint? ›

For most drywall interior painting projects, sanding is not necessary. Generally, small imperfections, fuzzies from the roller, or debris in the paint are hard to notice on walls that are painted with satin or flat paints finishes.

Why is my satinwood paint peeling? ›

The main reason paint peels is down to the surface it was s going onto. If it is a smooth gloss surface, you need to provide a 'key' for the paint to stick. This is normal achieved by rubbing with fine sandpaper then cleaning off and allowing the surface to dry.

Do I need to sand before using satinwood? ›

To remove the existing gloss, you'll need to sand your surfaces. There's no need to completely remove the paint, just make sure all surfaces are thoroughly stripped of the gloss. You can then apply the Satinwood paint.

Why does my satin paint look patchy? ›

Patchiness usually happens if you don't use enough paint, or apply it unevenly. Using a touch more paint, and painting in small sections one at a time, usually does the trick. Also, rolling in a grid fashion will get you an even finish too. But, sometimes, changes in the gloss level leave things patchy.

Does satin paint need sanding before repainting? ›

Due to the slight sheen in Annie Sloan Satin Paint we recommend sanding gently to key the surface before repainting. You should always ensure surfaces are clean, dry, and free from any dust, debris or oil-based contaminants before using any paints.

Should you wet a roller before painting? ›

Before you start a paint job, you actually want to wet the paint roller cover with water. “This primes the roller cover to soak up as much paint as possible,” Barr explains. But don't go too crazy—Barr suggests removing excess moisture with a paper towel and a good shake of the roller so it's just slightly damp.

What type of paint roller gives the smoothest finish? ›

Walls, Wood, and Metal - Small 1/4″ nap roller covers or foam rollers will produce the smoothest finish. Light to Medium Textured Surfaces - Microfiber rollers are best. Smooth Surfaces - Use a white woven short nap roller for an ultra fine finish.

What roller should I use for satin paint? ›

To apply flat, eggshell, or satin paints and stains, a knit roller cover is recommended. Knit roller covers can pick up and release higher amounts of paint than woven fabrics because the fibers have a looped backing with a single pass-through process resulting in a more “open” fabric.

Which is better satinwood or eggshell? ›

In contrast to eggshell paint, paint with a satinwood finish contains more of the resin that makes paint glossy, so definitely has a higher gloss factor than eggshell. This comes with the advantages of being more durable, scratch-resistant, and long-wearing.

How do you avoid brush and roller marks when painting? ›

To avoid making marks on the ceiling with your roller, reduce the amount of paint you use. If you notice roller marks appearing, re-roll the areas to smooth them out using very light pressure. Another method to avoid roller marks is to add another coat of paint in the opposite direction for the second coat of paint.

What is the best undercoat for satinwood? ›

What colour undercoat should I use for a sage satinwood? Satinwood is self undercoating, so there's no need for an undercoat which could potentially be a slightly different colour.

How do you seal satinwood paint? ›

You do not need to apply a sealer with eggshell or satinwood paint. This paint will dry with a sheen and once it cures it is durable.

How long should I wait between coats of satin paint? ›

After your first coat of paint is dry, it's safe to recoat typically after four to six hours. A good rule of thumb is to wait at least three hours to recoat your paint or primer if it's water-based. Waiting 24 hours is best for oil-based paint and primer.

Can you paint satin over gloss skirting boards? ›

You can use any paint to paint over gloss but it's important to use a super grip primer if you are painting over gloss with emulsion. If you are painting woodwork like skirting boards, doors or doorframes we recommend using satin or eggshell paint.

What happens if you paint satin over semi gloss? ›

If the semi-gloss paint on the walls is oil-based, then apply an oil-based satin paint. If it's otherwise latex semi-gloss paint on the wall, then use a latex satin paint. Although your semi-glossy wall now has texture, when painted it can still give off a considerable shine. The solution to this is applying a primer.

Is satinwood better than gloss? ›

Satinwood provides a fuller finish and does not give a shiny touch as much as gloss finish helps.
...
Satinwood vs Gloss.
Satinwood PaintGloss Paint
It consists of 20-30% of gloss in itIt contains 35-70% of gloss in it
It is much popular and expensiveThough somewhat popular but it is cheaper than other finishes
3 more rows

Why is my satinwood paint not drying? ›

Paint becomes sticky and tacky when it isn't able to dry thoroughly. Paint has trouble drying when the air is overly humid, or the weather is extremely hot or cold. Also, paint can have trouble drying if applied in thick coats.

Does satinwood go yellow? ›

If you are looking for a paint that doesn't yellow very much and you are happy with a satin/eggshell finish, then I'd recommend that you use Zinsser Permawhite or Dulux Quick Dry Satinwood. Gloss paints will yellow a bit more but the Dulux Quick Dry gloss doesn't yellow much and outperformed the other brands.

Does water based satinwood need undercoat? ›

Satinwood. Although satinwood paint is self-undercoating, it is often still advised to use a separate primer when painting directly onto bare wood. Satinwood paint is 50% sheen and is very popular for interior woodwork. Satinwood paints come in both water and oil-based finishes.

What is the best paint for doors and skirting boards? ›

Gloss - the highest sheen of paint, that provides a high sheen finish that has often been used traditionally for interior trim such as doors & skirting boards thanks to its reflectivity and high durability.

What is the best finish for skirting boards? ›

A satin finish gives a clean and crisp look to the skirting boards. It's also easy to maintain and clean. Satin is also well known for it's longevity and maintaining the original colour much longer than an oil based gloss.

What is the toughest paint for wood? ›

Gloss paint is a very durable option that gives a high-sheen finish to the likes of doors, window frames and skirting boards. Satinwood paint is an increasingly popular choice over gloss due to its more mid-sheen finish and the fact that it tends to remain brighter longer than gloss.

Is Dulux Once Satinwood oil or water based? ›

Dulux Once is an oil-based satinwood designed to cover interior woodwork in one coat, saving on labour and materials. The paint itself is thick and gloopy, so you can get a lot of product on in one go. Dulux Once is touch dry after about 6-hours but takes a lot longer than that to cure and go hard.

Can you paint straight onto satinwood? ›

Sure, but what's the condition of your satinwood? Is it raw with no finish? If you put water on it, will that darken the finish? If so, the wood is likely raw and ready to receive most any primer.

Do you Stir Dulux satinwood? ›

Application Description

Stir thoroughly before use to ensure the paint is completely mixed. Apply 2 coats of Dulux colour mixing Satinwood using a good quality synthetic brush. Allow 6 hours between coats, longer when cold and damp. Where a strong colour change is involved, more coats may be required.

Does satin paint show brush marks? ›

Imperfections on the walls

Satin paint will show any flaws in its application (i.e., brush strokes), so if you are a first-time DIY painter, you might consider hiring a professional for this or selecting another finish like eggshell,” she points out.

Is satin paint supposed to be shiny? ›

Satin paint has some sheen to it, and is an excellent choice for hardworking rooms, like kitchens and bathrooms. It stands up exceptionally well to scrubbing and regular cleaning. However, its glossiness highlights wall imperfections like cracks, divots or poorly patched areas.

Can you wait a week between coats of paint? ›

Under most circumstances, here are the recommended paint dry times: Acrylic, water-based, and latex paint and primer: At least four hours, but ideally eight to 12 hours between coats. Oil-based paint and primer: 24 hours or more between coats.

Does satin paint chip easily? ›

More Durable Than Flat, Less Durable Than Gloss

With nearly twice the amount of binders than flat paint, satin paint resists chips and scratches substantially better than flat paint and slightly better than eggshell paint.

Why is my satinwood paint bubbling? ›

Heat causes the moisture/air trapped beneath the film to expand and force its way out by forming blisters. Surface contamination can be trapped beneath a new paint film.

Can you do two coats of satinwood? ›

If the MDF is pre-primed and you apply the satinwood without any thinning it will no doubt cover. So yes, two coats.

Why does my satin paint look like gloss? ›

Depending on the lighting in the room, a satin finish can appear both glossy and flat, plus unlike gloss paint, it can be cleaned. It is recommended not to scrub thoroughly as this will remove some of the sheen from the wall. Satin paints come in both water-based and oil-based forms.

What is the best non yellowing satin paint? ›

If you are looking for a paint that doesn't yellow very much and you are happy with a satin/eggshell finish, then I'd recommend that you use Zinsser Permawhite or Dulux Quick Dry Satinwood. Gloss paints will yellow a bit more but the Dulux Quick Dry gloss doesn't yellow much and outperformed the other brands.

Is satin the best interior paint? ›

Satin paint has some sheen to it, and is an excellent choice for hardworking rooms, like kitchens and bathrooms. It stands up exceptionally well to scrubbing and regular cleaning. However, its glossiness highlights wall imperfections like cracks, divots or poorly patched areas.

What is the difference between satin paints? ›

A satin finish will leave you with a medium gloss, that doesn't shine as much as gloss paint as it's less reflective. It can be great for hiding imperfections because of the finish, whereas the gloss can highlight imperfections.

Is satin paint a good paint? ›

Satin is a great choice if you're looking to create an understated depth in a space, or enliven the paint color you choose. DURABILITY AND PERFORMANCE: Satin paint is very durable, making it great for high-traffic areas. Satin paint can easily be cleaned, though it can lose its sheen if scrubbed too roughly.

Does Dulux Trade Satinwood go yellow? ›

Dulux Quick Dry Satinwood creates a mid-sheen satin finish, providing a subtle, attractive alternative to gloss. It is self-undercoating, wipeable, non-yellowing and suitable for use on interior wood and metal.

Does water-based satinwood go yellow? ›

There are some advantages of water-based though. You can apply multiple coats in a day, clean up is a lot easier, it is better for the environment and the main one, water-based paint will never turn yellow.

Does water-based satin paint go yellow? ›

Does water-based gloss paint go yellow? Fully water-based gloss will never go yellow. However, a lot of gloss products which are marketed as “water-based”, are in fact, hybrids. A hybrid is basically a compromise between oil and water bases.

Does satin paint scratch easily? ›

Satin is more durable—an advantage in high-traffic spaces.

This is why satin paint is more resistant to dents, divots, scuffs, scratches, and stains, and more durable on the whole.

What paint gives the smoothest finish? ›

Semi-gloss and gloss paints reflect light, giving them a bright, shiny finish. While semi-gloss and gloss paints require more prep work and sanding than their matter counterparts to ensure a smooth application, paints with a glossy finish can be scrubbed once dry and are easy to clean.

What paint finish do interior designers use? ›

Eggshell is always an interior designer's preferred paint finish, which is why our founder, Nicole, an interior designer, chose this as our ultimate finish for walls. The name eggshell stems from the fact the finish appears mostly flat with just a touch of luster... similar to a chicken egg!

When should you use satin paint? ›

Satin paint is a mid-sheen paint that can be used for walls, woodwork and ceilings. It's more durable than matte paint but less durable than gloss. Satin paint is good for walls in high-traffic rooms but because it reflects light it will show faults in underlying surfaces that matte paint conceals.

Which paint finish is easiest to clean? ›

Eggshell Finish

"It is the easiest paint to wipe clean and is great for all areas of the home, including bathrooms and kitchens," she says. "I only use a gloss or semi-gloss paint on base, case, trim, and cabinetry."

Can you apply satin paint with a roller? ›

To apply flat, eggshell, or satin paints and stains, a knit roller cover is recommended. Knit roller covers can pick up and release higher amounts of paint than woven fabrics because the fibers have a looped backing with a single pass-through process resulting in a more “open” fabric.

Videos

1. The Best Ceiling Paint I've Ever Used and It's Not Expensive!
(The Funny Carpenter)
2. PAINT kitchen cabinets Perfectly FOAM ROLLER review
(LEARNINGCHORDS)
3. Eliminating "Roping" Brush Marks When Painting
(A Concord Carpenter / ToolBoxBuzz)
4. The Secret to Getting a Perfect Paint Finish with no Brush Marks
(seejanedrill)
5. Best Deck Paint in 2022 - Top 5 Deck Paints Review
(Tool Junkie)
6. BEST EXTERIOR WOOD PAINT - Could this be it?
(The Restoration Couple)
Top Articles
Latest Posts
Article information

Author: Lilliana Bartoletti

Last Updated: 02/26/2023

Views: 6591

Rating: 4.2 / 5 (53 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Lilliana Bartoletti

Birthday: 1999-11-18

Address: 58866 Tricia Spurs, North Melvinberg, HI 91346-3774

Phone: +50616620367928

Job: Real-Estate Liaison

Hobby: Graffiti, Astronomy, Handball, Magic, Origami, Fashion, Foreign language learning

Introduction: My name is Lilliana Bartoletti, I am a adventurous, pleasant, shiny, beautiful, handsome, zealous, tasty person who loves writing and wants to share my knowledge and understanding with you.