• Cast Iron Sprockets
Cast Iron is the most common and economical material for flat wire belt sprockets, they are accuratelycast from high grade iron. Other diameters can be provided on special order.
• Plastic Sprockets
All plastic sprockets are fully machined and meet USDA and FDA guidelines for food contact.
- UHMW Polyethylene can withstand continuous temperatures up to 180 degrees F.Stock sprockets
are UHMW.
- High Temp UHMW Polyethylene can withstand continuous temperatures up to 220 degrees F.
- Nylon sprockets provide 2-3 times the strength of UHMW and can withstand higher temperatures.
• Steel Sprockets
- FL sprockets have no flange and a hub sticking out one side to allow debris to fall through the belt.
- MT sprockets are made either from a solid piece of steel or have a flange welded at the base of the
teeth, for belt support. Flangeless and -MT sprockets have their teeth hardened to a Rockwell 50-55
on the C Scale. All other steel sprockets can have their teeth hardened on request.
• Stainless Steel Sprockets
Stainless sprockets are either investment cast from 18-8 stainless or fully machined from T-303 SSor T-316 SS. Fully machined flangeless (-FL) or machined tooth (-MT) sprockets made from variousstainless steels are also available.
 13SS |  37HD |  23HD-FL |
